Alien Multi-Layer 98mm Zirconia Disc - Discontinued

Alien Multilayer Zirconia comes in 9 Value Shades. Each shade is comprised of 9 transitional layers consisting of Dentin, Body, and Enamel Layers. Alien Multilayer Zirconia is rated at 1,100 MPa after the sintering stage. Compatibility 98mm with a 10mm step. Compatible with Weiland, VHF, Roland, and most open CAD CAM Milling Machines. Isostatic Pressing Each Zirconia Blank is isostaically pressed for consistent results every time. We do not cut corners, as we use the exact same zirconia for our milling services. Material Safety Data Sheet and IFU Sintering Schedule For more programs, including programs for certain ovens, visit the sintering page Up to 45 Units Total Run Time: 12-13 Hours Step Start Temp C End Temp C Rate Climb / min Time (mins) 1 0 900 10 90 2 900 900 0 10 3 900 1540 3 214.00 4 1540 1540 0 150 5 1540 0 0 Natural Cooling 46 - 80 units Total Run Time: 16-17 Hours Step Start Temp C End Temp C Rate Climb / min Time (mins) 1 0 900 6 150 2 900 900 0 30 3 900 1540 3 214.00 4 1540 1540 0 270 5 1540 0 0 Natural Cooling Warp Speed 5-15 units (Fast Sintering) Up to 3 Unit bridges only Total Run Time: 2-2.5 Hours Step Start Temp C End Temp C Rate Climb / min Time (mins) 1 0 1540 35 44 2 1540 1540 0 60 3 1540 300 45 28 ** CAUTION - Please check with your sintering oven manufacture if the oven is capable. Fast Sintering cycles add stress on your oven, causing parts to wear and tear sooner. Full Arch Hybrid Sintering Program Total Run Time: 23-25 hours Step Start Temp C End Temp C Rate Climb / min Time (mins) 1 0 900 6 150 2 900 900 Hold 30 3 900 1540 3 214.00 4 1540 1540 Hold 270 5 1540 1300 0 Natural Cooling 6 1300 1300 Hold 120 7 1300 1200 0 Natural Cooling 8 1200 1200 Hold 120 9 1200 1100 0 Natural Cooling 10 1100 1100 Hold 120 11 1100 1000 0 Natural Cooling 12 1000 1000 Hold 120 13 1000 900 0 Natural Cooling 14 900 900 Hold 60 15 900 0 0 Natural Cooling